Evaporative CO2 cooling using microchannels etched in silicon for the future LHCb vertex detector

The extreme radiation dose received by vertex detectors at the Large Hadron Collider dictates stringent requirements on their cooling systems. To be robust against radiation damage, sensors should be maintained below -20 degree C and at the same time, the considerable heat load generated in the readout chips and the sensors must be removed. Evaporative CO2 cooling using microchannels etched in a silicon plane in thermal contact with the readout chips is an attractive option. In this paper, we present the first results of microchannel prototypes with circulating, two-phase CO2 and compare them to simulations. We also discuss a practical design of upgraded VELO detector for the LHCb experiment employing this approach.Comment: 12 page

Detector Control System of the ATLAS Insertable B-Layer

soumis à publicationTo improve tracking robustness and precision of the ATLAS inner tracker an additional fourth pixel layer is foreseen, called Insertable B-Layer (IBL). It will be installed between the innermost present Pixel layer and a new smaller beam pipe and is presently under construction. As, once installed into the experiment, no access is available, a highly reliable control system is required. It has to supply the detector with all entities required for operation and protect it at all times. Design constraints are the high power density inside the detector volume, the sensitivity of the sensors against heatups, and the protection of the front end electronics against transients. We present the architecture of the control system with an emphasis on the CO2 cooling system, the power supply system and protection strategies. As we aim for a common operation of pixel and IBL detector, the integration of the IBL control system into the Pixel one will be discussed as well

Development of a CO2CO_2 cooling prototype for the CBM Silicon Tracking System

Traumatic brain injury (TBI) frequently occurs during childhood and adolescence with long-term neuropsychological and behavioral effects. Greater personal awareness of injury is associated with better outcomes. However, personal awareness is often assessed using ratings obtained from family members or significant others. Surprisingly, the accuracy of family-ratings compared with self-ratings has not been well studied in the TBI population. Thus, the purpose of this study was to examine self versus family-ratings of frontal dysfunction and secondly, the association between self/family reported frontal dysfunction and measured executive function outcomes. A total of 60 participants, approximately 10 years post-TBI, comprised 3 groups including; moderate/severe TBI (N=26; mean age 22.9, SD=3.0), mild TBI (N=20; mean age, 21.7, SD=2.7), and control (N=14: mean age, 21.6, SD=3.7). Neuropsychological testing was used to obtain domain scores for executive function and working memory/attention for each participant, and nominated family members and participants with TBI were asked to complete the Frontal Systems Behaviour Scale (FrSBe), consisting of three sub-scales; apathy, disinhibition, and executive dysfunction. Using the FrSBe there was no significant difference between the groups in executive function score, but the moderate/severe and mild groups had significantly lower working memory/attention scores compared with the control group (p<0.05). Repeated measures analysis of variance showed higher self-ratings on all sub-scales compared with family in each group (p<0.05). Scores on executive function and working memory/attention domains correlated with self, but not family reported executive dysfunction. Self-rated executive dysfunction explained 36% of the variance in executive function (p<0.001). While agreement between self-rated and family-rated total FrSBe scores was significant in all groups (p<0.001), our results showed that self-ratings were of higher predictive utility for executive functioning compared with family ratings. Further, at 10 years post-TBI, patients show greater awareness of deficits compared with family who rate consistently closer to the normal functioning range

Performance of the LHCb vertex locator

The Vertex Locator (VELO) is a silicon microstrip detector that surrounds the proton-proton interaction region in the LHCb experiment. The performance of the detector during the first years of its physics operation is reviewed. The system is operated in vacuum, uses a bi-phase CO2 cooling system, and the sensors are moved to 7 mm from the LHC beam for physics data taking. The performance and stability of these characteristic features of the detector are described, and details of the material budget are given. The calibration of the timing and the data processing algorithms that are implemented in FPGAs are described. The system performance is fully characterised. The sensors have a signal to noise ratio of approximately 20 and a best hit resolution of 4 μm is achieved at the optimal track angle. The typical detector occupancy for minimum bias events in standard operating conditions in 2011 is around 0.5%, and the detector has less than 1% of faulty strips. The proximity of the detector to the beam means that the inner regions of the n+-on-n sensors have undergone space-charge sign inversion due to radiation damage. The VELO performance parameters that drive the experiment's physics sensitivity are also given. The track finding efficiency of the VELO is typically above 98% and the modules have been aligned to a precision of 1 μm for translations in the plane transverse to the beam. A primary vertex resolution of 13 μm in the transverse plane and 71 μm along the beam axis is achieved for vertices with 25 tracks. An impact parameter resolution of less than 35 μm is achieved for particles with transverse momentum greater than 1 GeV/c

Precision luminosity measurements at LHCb

Measuring cross-sections at the LHC requires the luminosity to be determined accurately at each centre-of-mass energy √s. In this paper results are reported from the luminosity calibrations carried out at the LHC interaction point 8 with the LHCb detector for √s = 2.76, 7 and 8 TeV (proton-proton collisions) and for √sNN = 5 TeV (proton-lead collisions). Both the "van der Meer scan" and "beam-gas imaging" luminosity calibration methods were employed. It is observed that the beam density profile cannot always be described by a function that is factorizable in the two transverse coordinates. The introduction of a two-dimensional description of the beams improves significantly the consistency of the results. For proton-proton interactions at √s = 8 TeV a relative precision of the luminosity calibration of 1.47% is obtained using van der Meer scans and 1.43% using beam-gas imaging, resulting in a combined precision of 1.12%. Applying the calibration to the full data set determines the luminosity with a precision of 1.16%. This represents the most precise luminosity measurement achieved so far at a bunched-beam hadron collider

A Study of Cosmic Ray Secondaries Induced by the Mir Space Station Using AMS-01

The Alpha Magnetic Spectrometer (AMS-02) is a high energy particle physics experiment that will study cosmic rays in the $\sim 100 \mathrm{MeV}$ to $1 \mathrm{TeV}$ range and will be installed on the International Space Station (ISS) for at least 3 years. A first version of AMS-02, AMS-01, flew aboard the space shuttle \emph{Discovery} from June 2 to June 12, 1998, and collected $10^8$ cosmic ray triggers. Part of the \emph{Mir} space station was within the AMS-01 field of view during the four day \emph{Mir} docking phase of this flight. We have reconstructed an image of this part of the \emph{Mir} space station using secondary $\pi^-$ and $\mu^-$ emissions from primary cosmic rays interacting with \emph{Mir}. This is the first time this reconstruction was performed in AMS-01, and it is important for understanding potential backgrounds during the 3 year AMS-02 mission.Comment: To be submitted to NIM B Added material requested by referee. Minor stylistic and grammer change